Services
This booking secures slot for a Tune / Fault Diagnosis & 2 Dyno Runs.
Disclaimer: By agreeing to this, the Customer acknowledges that Dyno testing involves operating the motorcycle under extreme high-load and high-RPM conditions.
The Customer accepts all risks associated with high-stress performance testing.
Buddy's Motorcycles and its staff are not responsible for any mechanical, electrical, or structural failures (including but not limited to: engine, drivetrain, or tire damage) that may occur during or after the session.
The Customer warrants that the motorcycle is in sound mechanical condition, with correct fluid levels and roadworthy tires.
Performance modifications and tuning are performed at the owner's risk and may affect vehicle longevity or warranties.
All safety inspections will be performed
Disclaimer: By agreeing to this, the Customer acknowledges that Dyno testing involves operating the motorcycle under extreme high-load and high-RPM conditions.
The Customer accepts all risks associated with high-stress performance testing.
Buddy's Motorcycles and its staff are not responsible for any mechanical, electrical, or structural failures (including but not limited to: engine, drivetrain, or tire damage) that may occur during or after the session.
The Customer warrants that the motorcycle is in sound mechanical condition, with correct fluid levels and roadworthy tires.
Performance modifications and tuning are performed at the owner's risk and may affect vehicle longevity or warranties.
All safety inspections will be performed
This booking secures a slot for chain & sprocket inspection replacement (Front & Rear if needed)
Note: This is a deposit to your chain & sprocket replacement & will be deducted from your final bill as parts are billed upon inspection of your motorcycle & will be communicated before committing .
Note: This is a deposit to your chain & sprocket replacement & will be deducted from your final bill as parts are billed upon inspection of your motorcycle & will be communicated before committing .
This booking secures slot for a Major Service as below but not limited to:
- Full oil and filter change, spark plug replacement, valve clearance inspection and adjustment, throttle body synchronization, and air filter replacement.
- Draining and flushing the coolant system, bleeding the system.
- Replacing brake fluid, checking brake pads/drums & replacing if needed, cleaning calipers/pistons.
- Checking/adjusting the chain & sprocket or replacing it.
- Inspecting of fork seals
Note: This is a deposit to your Major Service required & will be deducted from your final bill as parts & fluids are billed upon inspection of your motorcycle & will be communicated before committing.
- Full oil and filter change, spark plug replacement, valve clearance inspection and adjustment, throttle body synchronization, and air filter replacement.
- Draining and flushing the coolant system, bleeding the system.
- Replacing brake fluid, checking brake pads/drums & replacing if needed, cleaning calipers/pistons.
- Checking/adjusting the chain & sprocket or replacing it.
- Inspecting of fork seals
Note: This is a deposit to your Major Service required & will be deducted from your final bill as parts & fluids are billed upon inspection of your motorcycle & will be communicated before committing.
This booking secures slot for a Minor Service as below but not limited to:
- Replacement of engine oil and oil filter.
- Inspection or replacement of the air filter.
- Inspection and potential replacement.
- Cleaning, adjusting, and lubricating the drive chain.
- Topping up coolant/brake fluid
Safety Inspection:
Brakes: Checking brake pads, discs, and fluid levels (front and rear).
Tires: Checking pressure and tread depth.
Electrical: Testing lights, horn, and battery.
Note: This is a deposit to your Minor Service required & will be deducted from your final bill as parts and fluids are billed upon inspection of your motorcycle & will be communicated before committing.
- Replacement of engine oil and oil filter.
- Inspection or replacement of the air filter.
- Inspection and potential replacement.
- Cleaning, adjusting, and lubricating the drive chain.
- Topping up coolant/brake fluid
Safety Inspection:
Brakes: Checking brake pads, discs, and fluid levels (front and rear).
Tires: Checking pressure and tread depth.
Electrical: Testing lights, horn, and battery.
Note: This is a deposit to your Minor Service required & will be deducted from your final bill as parts and fluids are billed upon inspection of your motorcycle & will be communicated before committing.
This booking secures a slot towards the fitment/labour of HEL Braided Brake lines
Why Upgrade to HEL Braided Lines?
Unlike standard rubber hoses that expand under pressure—leading to a "spongy" feeling at the lever—braided stainless steel lines do not swell. This ensures that every bit of pressure you apply at the lever is transferred directly to the caliper.
Eliminate Brake Fade: Stainless steel braiding prevents hose expansion, providing a consistent, sharp braking response even under heavy use.
Corrosion Resistance: Built with high-quality stainless steel fittings, these lines are designed to withstand the elements without rusting or degrading.
Custom Fitment: We offer a wide range of colors to match your bike’s aesthetic, with each kit swaged specifically for your make and model.
Our Fitment Service
When you book a fitment with us, we don't just swap the parts. Our service includes:
System Inspection: Checking your master cylinder and calipers for health.
Professional Routing: Ensuring lines are routed safely to avoid pinching or rubbing during suspension travel.
Fresh Fluid & Bleed: A complete system flush with high-performance brake fluid to ensure zero air bubbles and maximum stopping power.
Note: This is a deposit only & will be deducted from your final bill as parts are billed upon inspection of your motorcycle & will be communicated before committing.
Why Upgrade to HEL Braided Lines?
Unlike standard rubber hoses that expand under pressure—leading to a "spongy" feeling at the lever—braided stainless steel lines do not swell. This ensures that every bit of pressure you apply at the lever is transferred directly to the caliper.
Eliminate Brake Fade: Stainless steel braiding prevents hose expansion, providing a consistent, sharp braking response even under heavy use.
Corrosion Resistance: Built with high-quality stainless steel fittings, these lines are designed to withstand the elements without rusting or degrading.
Custom Fitment: We offer a wide range of colors to match your bike’s aesthetic, with each kit swaged specifically for your make and model.
Our Fitment Service
When you book a fitment with us, we don't just swap the parts. Our service includes:
System Inspection: Checking your master cylinder and calipers for health.
Professional Routing: Ensuring lines are routed safely to avoid pinching or rubbing during suspension travel.
Fresh Fluid & Bleed: A complete system flush with high-performance brake fluid to ensure zero air bubbles and maximum stopping power.
Note: This is a deposit only & will be deducted from your final bill as parts are billed upon inspection of your motorcycle & will be communicated before committing.
Not sure what you need, book a slot to come chat to us in person on what we offer and how we can assist you.
